Boat & RV
Oceanus 3- This Marine solar power kit was designed for a moderate to larger sized craft with moderate
sensitive electrical requirements in harsh environments, it includes:
sensitive electrical requirements in harsh environments, it includes:
-Two top of the line Kyocera 130 watt solar panels
-A US made Outback Power 2012MT 2000 watt sealed for harsh environments pure sine wave DC to AC inverter with a
built in 3 stage 100 amp battery charger and 60 amp transfer switch so you can charge your -batteries from shore
power or generator and a remote LCD panel
-A US made Inverter Turbo Kit
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ-20 20 amp pulse width modulated charge controller with digital volt and amp meter
-5 feet of inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 300 amp T-fuse with holder
-30 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
-A US made Outback Power 2012MT 2000 watt sealed for harsh environments pure sine wave DC to AC inverter with a
built in 3 stage 100 amp battery charger and 60 amp transfer switch so you can charge your -batteries from shore
power or generator and a remote LCD panel
-A US made Inverter Turbo Kit
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ-20 20 amp pulse width modulated charge controller with digital volt and amp meter
-5 feet of inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 300 amp T-fuse with holder
-30 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
260 WATT SOLAR
2,000 WATT SEALED SINE WAVE INVERTER/CHARGER DESIGNED FOR
HARSH ENVIRONMENT !
2,000 WATT SEALED SINE WAVE INVERTER/CHARGER DESIGNED FOR
HARSH ENVIRONMENT !
TOP OF THE LINE SOLAR PANELS, 2,000 WATT OUTBACK PURE SINE WAVE INVERTER WITH 100 AMP BATTERY
CHARGER, CHARGE CONTROLLER WITH DIGITAL METER, WIRING, 3 MODULE MOUNTS, AND FUSES FOR ONLY
$4,167.00
CHARGER, CHARGE CONTROLLER WITH DIGITAL METER, WIRING, 3 MODULE MOUNTS, AND FUSES FOR ONLY
$4,167.00
Poseidon 1 -This Marine solar power kit was designed for a larger sized craft with larger electrical requirements, it
includes:
-Three top of the line Kyocera 130 watt solar panels
-A US made Xantrex Freedom Marine 2500 DC to AC inverter with a built in 3 stage 130 amp battery charger and
transfer switch so you can charge your batteries from shore power or generator
-Three US made flat solar module mounting kits with stainless steel mounting hardware
-A Xantrex C-35 35 amp pulse width modulated charge controller
-5 feet of 4/0 inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
includes:
-Three top of the line Kyocera 130 watt solar panels
-A US made Xantrex Freedom Marine 2500 DC to AC inverter with a built in 3 stage 130 amp battery charger and
transfer switch so you can charge your batteries from shore power or generator
-Three US made flat solar module mounting kits with stainless steel mounting hardware
-A Xantrex C-35 35 amp pulse width modulated charge controller
-5 feet of 4/0 inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
390 WATT SOLAR
2,500 WATT INVERTER/CHARGER
2,500 WATT INVERTER/CHARGER
TOP OF THE LINE SOLAR PANELS, 2500 WATT HEART INVERTER/CHARGER WITH A 130 AMP BATTERY
CHARGER, CHARGE CONTROLLER, 4 MODULE MOUNTS, WIRING AND FUSES FOR ONLY
$4,582.00
CHARGER, CHARGE CONTROLLER, 4 MODULE MOUNTS, WIRING AND FUSES FOR ONLY
$4,582.00
Poseidon 2 -This Marine solar power kit was designed for a larger sized craft with larger electrical requirements,
it includes
it includes
-Four top of the line Kyocera 130 watt solar panels
-A US made Xantrex SW2512MC 2500 Watt DC to AC sine wave inverter with a built in 3 stage 150 amp @ 12 volt
battery charger so you can charge your batteries from shore power or generator
-Four US made flat solar module mounting kits with stainless steel mounting hardware
-A Xantrex C-35 35 amp pulse width modulated charge controller
-A US made Trace TCB6 combiner box with fuses
-5 feet of 4/0 inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
-A US made Xantrex SW2512MC 2500 Watt DC to AC sine wave inverter with a built in 3 stage 150 amp @ 12 volt
battery charger so you can charge your batteries from shore power or generator
-Four US made flat solar module mounting kits with stainless steel mounting hardware
-A Xantrex C-35 35 amp pulse width modulated charge controller
-A US made Trace TCB6 combiner box with fuses
-5 feet of 4/0 inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
520 WATT SOLAR
2,500 WATT SINE WAVE INVERTER/CHARGER
2,500 WATT SINE WAVE INVERTER/CHARGER
TOP OF THE LINE SOLAR PANELS, XANTREX 2,500 WATT SINE WAVE INVERTER WITH A 150 AMP BATTERY
CHARGER, 60 AMP TRANSFER SWITCH, CHARGE CONTROLLER, 4 MODULE MOUNTS, WIRING AND FUSES FOR
ONLY
$6,298.00
CHARGER, 60 AMP TRANSFER SWITCH, CHARGE CONTROLLER, 4 MODULE MOUNTS, WIRING AND FUSES FOR
ONLY
$6,298.00
Poseidon 3-This Marine solar power kit was designed for an even larger craft with larger electrical
requirements, it includes:
requirements, it includes:
-Six top of the line Kyocera 130 watt solar panels
-A US made Outback Power VFX2812M 2,800 watt DC to AC sine wave inverter with a built in 3 stage 125 amp battery
charger so you can charge your batteries from shore power or generator, 60 amp AC transfer switch and automatic
remote generator start capability
-A US made Outback Mate remote control unit
-Six US made flat solar module mounting kits with stainless steel mounting hardware
-A Trace C-60 60 amp pulse width modulated charge controller
-A US made Trace TM 500 digital system monitor with shunt
-A US made Trace TCB6 combiner box with fuses
-5 feet of 4/0 inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-100 ft of sunlight resistant wiring
-60 amp inline photovoltaic circuit breaker and instructions.
-A US made Outback Power VFX2812M 2,800 watt DC to AC sine wave inverter with a built in 3 stage 125 amp battery
charger so you can charge your batteries from shore power or generator, 60 amp AC transfer switch and automatic
remote generator start capability
-A US made Outback Mate remote control unit
-Six US made flat solar module mounting kits with stainless steel mounting hardware
-A Trace C-60 60 amp pulse width modulated charge controller
-A US made Trace TM 500 digital system monitor with shunt
-A US made Trace TCB6 combiner box with fuses
-5 feet of 4/0 inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-100 ft of sunlight resistant wiring
-60 amp inline photovoltaic circuit breaker and instructions.
780 WATT SOLAR
2,800 WATT SINE WAVE INVERTER/CHARGER
2,800 WATT SINE WAVE INVERTER/CHARGER
TOP OF THE LINE SOLAR PANELS, 2,800 WATTS OF SINE WAVE INVERTER POWER WITH AN AUTOMATIC 125
AMP BATTERY CHARGER, 60 AMP TRANSFER SWITCH WITH AUTOMATIC REMOTE GENERATOR START, MATE
REMOTE CONTROL UNIT, TRACE 60 AMP CHARGE CONTROLLER, DIGITAL SYSTEM MONITOR, COMBINER BOX,
WIRING, FUSES AND 6 MODULE MOUNTS FOR ONLY
$7,698.00
AMP BATTERY CHARGER, 60 AMP TRANSFER SWITCH WITH AUTOMATIC REMOTE GENERATOR START, MATE
REMOTE CONTROL UNIT, TRACE 60 AMP CHARGE CONTROLLER, DIGITAL SYSTEM MONITOR, COMBINER BOX,
WIRING, FUSES AND 6 MODULE MOUNTS FOR ONLY
$7,698.00
(Page 1)
(Page 1)
Oceanus 1- This Marine solar power kit was designed for a moderate to larger sized craft with moderate
electrical requirements, it includes:
electrical requirements, it includes:
-Two top of the line Kyocera 130 watt solar panels
-A name brand name Xantrex Freedom Marine 2500 watt inverter with a built in 130 amp battery charger and 30
amp automatic AC transfer switch so you can charge your batteries from shore power or generator.
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ M20+ 25 amp pulse width modulated charge controller with digital volt and amp meter
-5 feet of inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
-A name brand name Xantrex Freedom Marine 2500 watt inverter with a built in 130 amp battery charger and 30
amp automatic AC transfer switch so you can charge your batteries from shore power or generator.
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ M20+ 25 amp pulse width modulated charge controller with digital volt and amp meter
-5 feet of inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 400 amp T-fuse with holder
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
260 WATT SOLAR / 2,500 WATT INVERTER/CHARGER
TOP OF THE LINE SOLAR PANELS, 2500 WATT XANTREX FREEDOM MARINE INVERTER/CHARGER WITH 130 AMP
BATTERY CHARGER AND AC TRANSFER SWITCH, 25 AMP CHARGE CONTROLLER WITH DIGITAL METER, WIRING,
TWO MODULE MOUNTS, AND FUSES FOR ONLY
$3,979.00
BATTERY CHARGER AND AC TRANSFER SWITCH, 25 AMP CHARGE CONTROLLER WITH DIGITAL METER, WIRING,
TWO MODULE MOUNTS, AND FUSES FOR ONLY
$3,979.00
Oceanus 2 -This Marine solar power kit was designed for a moderate to larger sized craft with moderate
sensitive electrical requirements, it includes:
sensitive electrical requirements, it includes:
-Two top of the line Kyocera 130 watt solar panels
-A Xantrex Prosine 2000 watt pure sine wave DC to AC inverter with a built in 3 stage 100 amp battery charger and 30
amp transfer switch so you can charge your batteries from shore power or generator and a remote LCD panel
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ-20 20 amp pulse width modulated charge controller with digital volt and amp meter
-5 feet of inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 300 amp T-fuse with holder
-30 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
-A Xantrex Prosine 2000 watt pure sine wave DC to AC inverter with a built in 3 stage 100 amp battery charger and 30
amp transfer switch so you can charge your batteries from shore power or generator and a remote LCD panel
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ-20 20 amp pulse width modulated charge controller with digital volt and amp meter
-5 feet of inverter cable with ring terminals for direct connection to battery
-1.5 foot 4/0 fuse cable with ring terminals
-A 300 amp T-fuse with holder
-30 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
260 WATT SOLAR / 2,000 WATT SINE WAVE / INVERTER/CHARGER
TOP OF THE LINE SOLAR PANELS, 2,000 WATT XANTREX PROSINE PURE SINE WAVE INVERTER WITH 100 AMP
BATTERY CHARGER, CHARGE CONTROLLER WITH DIGITAL METER, WIRING, 3 MODULE MOUNTS, AND FUSES
FOR ONLY
$3,932.00
BATTERY CHARGER, CHARGE CONTROLLER WITH DIGITAL METER, WIRING, 3 MODULE MOUNTS, AND FUSES
FOR ONLY
$3,932.00