Nautilus 1 This Marine solar power kit was designed for a small to moderate size craft with moderate DC electrical
requirements, it includes:
Two of Kyocera's latest top of the line 135 watt solar panels.
Two US made flat solar module mounting kits with stainless steel mounting hardware
A US made BZ Products MPPT250 250 Watt high efficiency Multi Power Point Tracking charge controller with a 5 year
warranty.
25 ft of sunlight resistant wiring
Two MC4-5 cables.
25 amp inline photovoltaic fuse and instructions.
requirements, it includes:
Two of Kyocera's latest top of the line 135 watt solar panels.
Two US made flat solar module mounting kits with stainless steel mounting hardware
A US made BZ Products MPPT250 250 Watt high efficiency Multi Power Point Tracking charge controller with a 5 year
warranty.
25 ft of sunlight resistant wiring
Two MC4-5 cables.
25 amp inline photovoltaic fuse and instructions.
Boat & RV
Affordable well made solar systems to give yourself total freedom without having to refuel a
generator or run the engine. Panels are cut from solid silica ingot.
generator or run the engine. Panels are cut from solid silica ingot.
Marine applications
This Marine kit was designed for a vessel that already have an inverter installed or for a vessel
that has no need for AC appliances.
that has no need for AC appliances.
TOP OF THE LINE SOLAR PANELS, FUSING, A US MADE CHARGE CONTROLLER, WIRING, INSTRUCTIONS AND
TWO MOUNTING KITS FOR ONLY
$2,519.00
TWO MOUNTING KITS FOR ONLY
$2,519.00
Nautilus 2 With MPPT POWER BOOSTER ! This Marine solar power kit was designed for a moderate size craft with
even greater DC electrical requirements, it includes:
-Three top of the line Kyocera 130 watt solar panels
-Three US made flat solar module mounting kits with stainless steel mounting hardware
-A RV Power Products 25 Amp Multi Power Point Tracking charge controller with display
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
even greater DC electrical requirements, it includes:
-Three top of the line Kyocera 130 watt solar panels
-Three US made flat solar module mounting kits with stainless steel mounting hardware
-A RV Power Products 25 Amp Multi Power Point Tracking charge controller with display
-40 ft of sunlight resistant wiring
-25 amp inline photovoltaic fuse and instructions.
This kit was designed for vessels that already have an inverter installed or for a vessel that has no need
for AC appliances.
for AC appliances.
TOP OF THE LINE SOLAR PANELS, FUSING, A RV POWER PRODUCT SB2000E MULTI POWER POINT POWER
TRACKING CHARGE CONTROLLER, WIRING, INSTRUCTIONS AND THREE MOUNTING KITS FOR ONLY
$3,148.00
TRACKING CHARGE CONTROLLER, WIRING, INSTRUCTIONS AND THREE MOUNTING KITS FOR ONLY
$3,148.00
Triton 1 This Marine solar power kit was designed for a small to moderate size craft with minimal electrical
requirements, it includes:
requirements, it includes:
-One top of the line Kyocera 130 watt solar panels
-One name brand Xantrex Portawattz 1000 watt DC to AC inverter.
-One US made flat solar module mounting kit with stainless steel mounting hardware
-A US made BZ-240 14 amp high efficiency pulse width modulated charge controller
-One pair of #4AWG inverter cables
-25 ft of sunlight resistant wiring
-15 amp inline photovoltaic fuse and instructions.
-One name brand Xantrex Portawattz 1000 watt DC to AC inverter.
-One US made flat solar module mounting kit with stainless steel mounting hardware
-A US made BZ-240 14 amp high efficiency pulse width modulated charge controller
-One pair of #4AWG inverter cables
-25 ft of sunlight resistant wiring
-15 amp inline photovoltaic fuse and instructions.
TOP OF THE LINE SOLAR PANELS, 1000 WATTS OF INVERTER POWER, FUSING, A CHARGE CONTROLLER,
WIRING AND A MOUNTING KIT FOR ONLY
WIRING AND A MOUNTING KIT FOR ONLY
$1,879.00
Triton 3 This Marine solar power kit was designed for a moderate to larger sized craft with moderate electrical
requirements, it includes:
requirements, it includes:
-Two top of the line Kyocera 130 watt solar panels
-A name brand name Xantrex Freedom Marine 2000 watt inverter with a built in 100 amp battery charger and 30
amp automatic AC transfer switch so you can charge your batteries from shore power or generator.
-One pair of 4/0 inverter cables
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ M20+ 25 amp pulse width modulated charge controller with digital volt and amp meter
-A 400 amp T-fuse with holder
-25 ft of sunlight resistant wiring, 25 amp inline photovoltaic fuse and instructions.
-A name brand name Xantrex Freedom Marine 2000 watt inverter with a built in 100 amp battery charger and 30
amp automatic AC transfer switch so you can charge your batteries from shore power or generator.
-One pair of 4/0 inverter cables
-Two US made flat solar module mounting kits with stainless steel mounting hardware
-A US made BZ M20+ 25 amp pulse width modulated charge controller with digital volt and amp meter
-A 400 amp T-fuse with holder
-25 ft of sunlight resistant wiring, 25 amp inline photovoltaic fuse and instructions.
TOP OF THE LINE SOLAR PANELS, XANTREX 2000 WATT INVERTER/CHARGER WITH 100 AMP BATTERY
CHARGER AND AC TRANSFER SWITCH, CHARGE CONTROLLER WITH DIGITAL METER, WIRING, TWO
MODULE MOUNTS AND FUSES FOR ONLY
$3,689.00
CHARGER AND AC TRANSFER SWITCH, CHARGE CONTROLLER WITH DIGITAL METER, WIRING, TWO
MODULE MOUNTS AND FUSES FOR ONLY
$3,689.00
260 WATT SOLAR
2,000 WATT INVERTER
2,000 WATT INVERTER
270 WATTS
130 WATT SOLAR
1,000 WATT INVERTER
1,000 WATT INVERTER
390 WATTS
(Page 1)
(Page 1)
The new AIR X Marine improves on the revolutionary features of the original wind module. New microprocessor-based
controller.
New "wave washer" combined with looser bearing-to-body tolerances are incorporated into the face bearing set. This
results in lower compression on the bearing/race, with quieter running and lower startup speed. It also lowers stress on
the bearings and shaft when subject to twisting forces during normal operation. New series of carbon reinforced blades.
More robust tower clamp and yaw assembly for stronger and more secure tower mounting.
Improved powder coating protection, as the body is acid etched and treated with alodine before powder coating with a
UV resistant marine paint.
All hardware is a marine grade stainless steel.
Assembly includes "Tef-gel" compound to resist corrosive activity between dissimilar metals like stainless steel and
aluminum.
Body and electronics are completely sealed for prevention of water ingress, even under brief immersion conditions.
Unprecedented 3 YEAR WARRANTY
Carbon Fiber Composite Blades
Aircraft quality aluminum alloy castings
Exclusive Brush-less neodymium cubic curve alternator. Sophisticated internal battery charge regulator
Maintenance-free - Only two moving parts Full Marine Tower Kit available for easy boat mounting. Exclusive
Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and
reducing noise. Marine powder coating and stainless steel fittings for corrosion protection in a marine environment High
Wind Safe Mode - Automatically slows turbine in potentially damaging winds. Reduces noise and distractions for
peace-of-mind when on or off your boat.
Neighbor Friendly.
Rotor Diameter: 46" (1.14 meters)
Weight: 13 lbs (6 kg)
Start up wind speed: 7 mph (3 m/s)
Voltage: 12 & 24 VDC (36/48 VDC available soon)
Output: 400 watts at 28 mph (12.5 m/s) $995.00
controller.
New "wave washer" combined with looser bearing-to-body tolerances are incorporated into the face bearing set. This
results in lower compression on the bearing/race, with quieter running and lower startup speed. It also lowers stress on
the bearings and shaft when subject to twisting forces during normal operation. New series of carbon reinforced blades.
More robust tower clamp and yaw assembly for stronger and more secure tower mounting.
Improved powder coating protection, as the body is acid etched and treated with alodine before powder coating with a
UV resistant marine paint.
All hardware is a marine grade stainless steel.
Assembly includes "Tef-gel" compound to resist corrosive activity between dissimilar metals like stainless steel and
aluminum.
Body and electronics are completely sealed for prevention of water ingress, even under brief immersion conditions.
Unprecedented 3 YEAR WARRANTY
Carbon Fiber Composite Blades
Aircraft quality aluminum alloy castings
Exclusive Brush-less neodymium cubic curve alternator. Sophisticated internal battery charge regulator
Maintenance-free - Only two moving parts Full Marine Tower Kit available for easy boat mounting. Exclusive
Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and
reducing noise. Marine powder coating and stainless steel fittings for corrosion protection in a marine environment High
Wind Safe Mode - Automatically slows turbine in potentially damaging winds. Reduces noise and distractions for
peace-of-mind when on or off your boat.
Neighbor Friendly.
Rotor Diameter: 46" (1.14 meters)
Weight: 13 lbs (6 kg)
Start up wind speed: 7 mph (3 m/s)
Voltage: 12 & 24 VDC (36/48 VDC available soon)
Output: 400 watts at 28 mph (12.5 m/s) $995.00
Air X Marine wind generator
Portable Boat / RV mount
for X & Air Southwest wind
generators. Take it with you!
$899.00
for X & Air Southwest wind
generators. Take it with you!
$899.00